RoverCNC LT Build Log - Step 4 - Z-Axis Assembly

— Installing the Z-Axis Assembly —

The Z-Axis Assembly is very straight forward to attach. The bolt pattern on the z-axis assembly back plate supports the threads available on the x-axis front plate so you all that is required are M8x1.25mm low head cap screws to attach the it.

Z-Axis Attached

Depending on the z-axis assembly purchased, you can attach the z-axis assembly at various lengths to support the height required and dependent upon the spindle/router being used. Spindles that come with a 80mm diameter, we offer a spindle mount that will attach directly to the z-axis assembly plate that can be purchased separately.